{"id":818,"date":"2024-08-14T22:22:24","date_gmt":"2024-08-14T22:22:24","guid":{"rendered":"https:\/\/queen-plast.com\/?p=818"},"modified":"2024-08-14T22:22:24","modified_gmt":"2024-08-14T22:22:24","slug":"production-process-of-polypropylene-woven-bags-in-california","status":"publish","type":"post","link":"https:\/\/queen-plast.com\/index.php\/2024\/08\/14\/production-process-of-polypropylene-woven-bags-in-california\/","title":{"rendered":"Production Process of Polypropylene Woven Bags in California"},"content":{"rendered":"
\n
\n

Production Process of Polypropylene Woven Bags<\/h1>\n

 <\/p>\n<\/div>\n<\/div>\n

\n
\n
\n
\n
\n
\n
\n
\n
\n

Production process of Woven polypropylene bags contains knowlege about plastic industry, textile weaving, and even chemistry.\u00a0 This article is going to introduce the complete production process of how the polypropylene resin becomes a finished woven polypropylene sack step by step.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

\n
\n
\n
\n
\n
\"Polypropylene<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\"PP<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\"PP<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\"PP<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n
\n

Sumarize of Woven polypropylene bags production process.<\/h2>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n
\n

Overall, though the production process of woven pp sacks requires multiple equipments, it\u2019s still an industry with simple process flow, easy control of process parameters, easy equipments operation, high production efficiency. Actually it\u2019s mostly benefited from its stable and reliable equipments with safe operation and low maintenance rates. Specific manufacturing process steps of woven polypropylene (PP) bags will be as follows,<\/p>\n

    \n
  1. Polypropylene tapes drawing.<\/li>\n
  2. Circular weaving.<\/li>\n
  3. Coating and lamination.<\/li>\n
  4. Printing.<\/li>\n
  5. Cutting and sewing.<\/li>\n
  6. Baling.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \n

    Production process of Woven polypropylene bags specific steps.<\/h2>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \n

    Step 1 , Polypropylene Tapes Drawing<\/h3>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \n

    1. Raw material<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \n

    Raw material of woven polypropylene ( PP ) bags are divided to powder polypropylene and particle polypropylene.\u00a0\u00a0For different pp woven bag applications,<\/em>\u00a0manufacturers are taking different types of polypropylene materials and added with\u00a0different additives.<\/em>\u00a0 In the early stage of this industry, almost all the manufacturers were using 100% particle polypropylene material. With development of technology, more and more manufacturers awared that to add a certain percentage of modifying material ( mainly Caco3 ) could not only increase the stability of materials but also could greatly reduce material costs, the percentage is commonly controlled within the range of 20%-40%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

    \n
    \n
    \n
    \n
    \n
    \n

    2. Manufacturing process of polypropylene tapes drawing<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \n

    After raw material of Polypropylene and additives were put into the extruder, it is heated at 190-250 \u2103 and sheared by the screw and barrel. After plasticization process, the material is extruded at constant pressure and velocity. After formed by the tooling die, materials enter into the cooling water in shape of melted film. After cooling, the film is slit into narrow embryo yarns by the blades. Then the embryo yarn is being stretched in the oven with high temperature until it comes out in shape of flat tapes. Then the flat tapes are heat set on the hot rollers, and shrink at low traction speed. Finally, the flat tapes are rewinded\u00a0 by the disk differential tension winding system. It becomes the base structure of pp woven fabric and woven polypropylene sacks.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

    \n
    \n
    \n
    <\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \"PP<\/div>\n<\/div>\n
    \n
    <\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \n

    3.Technological indexes of polypropylene tapes drawing.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
    \n
    \n
    \n
    \n
    \n
    \n

    The technological indexes of polypropylene tapes manufacturing are mainly divided into four categories:<\/p>\n

      \n
    1. Physical and chemical modification index. It mainly includes blending modification, blending ratio, adding ratio of functional additives and blending ratio of recycled materials.<\/li>\n
    2. Physical property and rheological index. It mainly includes draft ratio, inflation ratio and retraction ratio.<\/li>\n
    3. Mechanical performance index. It mainly includes breaking force, relative breaking force, and elongation at break, linear velocity and linear density deviation;<\/li>\n
    4. Dimension tolerance\u00a0 index. It mainly includes the thickness and width of flat tapes (yarn).<\/li>\n<\/ol>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
      \n
      \n
      \n
      \n
      \n
      \n

      Step 2. Circular Weaving.<\/h3>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
      \n
      \n
      \n
      \n
      \n
      \n

      1.Circular knitting process<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
      \n
      \n
      \n
      \n
      \n
      \n

      First of all, the warp tape is drawn out from the bottom of each row of spindles on the warp frame. Through the porcelain hole on the warp frame, to the first vertical plate, to the yarn pressing roller, to the yarn feeding roller, to the yarn guiding roller, to the second vertical plate, to the yarn guiding roller,to the magnetic hole, to the tension rod, to the round steel buckle, to the warp fixing ring and reach the reserved cloth base. Meanwhile, the weft tapes are loaded into the shed, when the circular looms starts to run, shuttles move in circling running. With close cooperation of the warp tape supplying system and the shuttle pushing device, warp tapes and weft tapes are knnited as tubular woven polypropylene fabric. Traction device was equiped on the top of the loom which would guides tubular fabric to a press roller and then goes to rewinding device behind the warp frame.\u00a0 Common type 4 shuttles circular looms could knit around 2300meters of\u00a0Woven polypropylene fabric rolls\u00a0<\/em>every 24hours.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

      \n
      \n
      \n
      \n
      \n
      \n

      2. Main manufacturing index of polypropylene circular knitting process<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
      \n
      \n
      \n
      \n
      \n
      \n
        \n
      1. \n
        Weaving density.<\/h5>\n<\/li>\n<\/ol>\n

        Weaving density refers to the number of warp and weft tapes in a 100 mm \u00d7 100 mm area. Different applications of woven polypropylene bags require different weaving density. A case in point, bags for flour packing will requires more tighter weaving to avoid leakage of flours. The density of commonly used woven fabric is 36 \u00d7 36 pieces \/ 10cm, 40 \u00d7 40 pieces\/10 cm, 48 \u00d7 48 \/ 10 cm. (Some countries are using mesh density per square inch, like 7\u00d77, 10\u00d710, 14\u00d714 etc.)<\/p>\n

          \n
        1. \n
          Tensile strength of woven fabric.<\/h5>\n<\/li>\n<\/ol>\n

          Tensile strength is also called tensile capacity, tensile force. For pp woven fabric, it bears tensile strength in warp and weft directions, so it is called warp tensile strength or weft tensile strength also. It\u2019s the most important index of woven fabric which decides how heavy or capacity could a polybag carries. Unit of Tensile strength Newton\/5cm.<\/p>\n

            \n
          1. \n
            Unit Weight per square meter of pp woven fabric.<\/h5>\n<\/li>\n<\/ol>\n

            The weight per unit area of woven fabric is expressed by gram weight per square meter, which is an important technical index of woven fabric. Gram weight per square meter mainly depends on the density of warp and weft and the thickness of flat yarn. Gram weight per square meter affects the tensile strength and load capacity of woven fabric.\u00a0PP woven bags<\/em>\u00a0manufacturers control their costs of material by adjusting the g\/m2 of the pp woven fabric what they are using. In some countries, Denier is also used to express the thickness of woven polypropylene fabric, as to how to cover denier to gsm please visit our article\u00a0How to Convert Denier of PP Woven Fabric to GSM.<\/em><\/p>\n

              \n
            1. \n
              Width.<\/h5>\n<\/li>\n<\/ol>\n

              The width of woven fabric directly affects the bag making process. For tubular fabric, the width is expressed by half of the circumference. Width also involves the shrinkage rate. After cutting, printing and sewing, the width of the bag will be slightly smaller than that of the cloth width which just been woven, which we call it width retraction.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

              \n
              \n
              \n
              \n
              \n
              \"Circular<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
              \n
              \n
              \n
              \n
              \n
              \n

              Step 3. Coating and lamination.<\/h3>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
              \n
              \n
              \n
              \n
              \n
              \n

              1.Manufacturing process of coating and lamination.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
              \n
              \n
              \n
              \n
              \n
              \n

              Working principle of coating and lamination are exactly same which is to compound the melted polypropylene and Polyethylene onto pp woven fabric. The difference is when we saying lamination, we are using BOPP film or kraft paper to compound with woven polypropylene fabric while doing coating. Coating and lamination could be made on one side or both sides of woven pp fabric.\u00a0 For different materials lamination, differnent ratio of resins are taken as lamination material. For instance, for Bopp to pp woven fabric lamination, perfect ratio is 3PP:1PE, but for Kraft paper to PP woven fabric lamination, the perfect ratio will goes to 3PE:1PP. Temperature setting on extrusion dies needs to be adjusted accordingly as well.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

              \n
              \n
              \n
              \n
              \n
              \n

              2.Main manufacturing index of coating and lamination.<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
              \n
              \n
              \n
              \n
              \n
              \n

              Main manufacturing index of coating and lamination is the controlling skill on temperature setting, coating pressure setting, and coated material peeling off strength.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

              \n
              \n
              \n
              \n
              \n
              \n

              Step 4. Printing<\/h3>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
              \n
              \n
              \n
              \n
              \n
              \n

              There are two typical types of printing method for pp woven sacks.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

              \n
              \n
              \n
              \n
              \n
              \n
                \n
              1. Flexographic Printing.\u00a0 Please visit our article\u201dCan PP Woven Bags Be Printed<\/em>\u201d for detailed information about flexographic printing.<\/li>\n
              2. Rotogravure Printing.Please visit our article\u201dGravure Printing for Woven Bags<\/em>\u201d for detailed information about Rotogravure printing.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
                \n
                \n
                \n
                \n
                \n
                \n

                Step 5. Cutting and Sewing<\/h3>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
                \n
                \n
                \n
                \n
                \n
                \n

                In the initial development stage of woven bag production industry, bag cutting and sewing are divided into two separate steps. With the development and updating of technology and production equipment, the cutting and sewing processes of woven bags have gradually merged into two different units on a machine.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

                \n
                \n
                \n
                \n
                \n
                \n

                1.Cutting<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
                \n
                \n
                \n
                \n
                \n
                \n

                The woven bag cutting is divided into heat cutting and cold cutting.<\/p>\n

                  \n
                1. Heat cutting. For those woven bags that are not been laminated, a high-temperature blade should be used to cut the bag while ironing the cut tapes to avoid scattering.<\/li>\n
                2. Cold cutting. that is to cut bags with a blade at room temperature, is only for those woven bags that have been coated. The cold cutting process does not require heating blades, so the power consumption is less.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n

                  2.Sewing<\/h4>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n

                  The sewing thread is polyester threads now which was made by cotton. Different thickness of the sewing thread, needle pitch would affects the strength of the sealing. Customer could choose to use single stitch or double stitch on the bottom of the bags.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

                  \n
                  \n
                  \n
                  \n
                  \n
                  \n

                  The sewing and cutting machine is a type of all-in-one machine, it may intergrated with functions of sewing,cutting,gusseting,liner inserting, handle punching or even top hemming. Among the complete manufacturing process of pp woven bags, sewing and cutting machines offers functional options for different bags\u2019 applications.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

                  \n
                  \n
                  \n
                  \n
                  \n
                  \n

                  Step 6. Baling<\/h3>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n
                  \n

                  Packing volumetric directly decides how much freight would be the freight cost for shipping, different type of baling machines offers diffrent pressures on packed pp woven bags, the more pressure it offers, the less volumetric could get. This logic makes Hydraulic type of\u00a0 baling machines popular in current markets.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

                  \n
                  \n
                  \n
                  \n
                  \n
                  \n

                  After baling, the complete manufacturing process of pp woven bags has been done and it\u2019s been ready for shipping.<\/p>\n

                  For the readers of this article, if you are interested in set up an factory for pp woven bags manufacturing, we would like to recommend you to start from importing\u00a0pp woven fabric\u00a0and do sewing and cutting at your side, that would be more simple and cost-effective to start with.<\/p>\n

                  For any question about PP woven bags manufacturing, welcome to contact us for further discussion.<\/p>\n

                   <\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

                  Production Process of Polypropylene Woven Bags   Production process of Woven polypropylene bags contains knowlege about plastic industry, textile weaving, and even chemistry.\u00a0 This article is going to introduce the complete production process of how the polypropylene resin becomes a finished woven polypropylene sack step by step. Sumarize of Woven polypropylene bags production process. Overall, […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/posts\/818"}],"collection":[{"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/comments?post=818"}],"version-history":[{"count":1,"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/posts\/818\/revisions"}],"predecessor-version":[{"id":821,"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/posts\/818\/revisions\/821"}],"wp:attachment":[{"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/media?parent=818"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/categories?post=818"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/queen-plast.com\/index.php\/wp-json\/wp\/v2\/tags?post=818"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}